Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SGMiner Interface Explained
#1
   

A:   The number of Accepted shares
R:   The number of Rejected shares
HW:  The number of HardWare errors
WU:  The Work Utility defined as the number of diff1 equivalent shares / minute


GPU 0: 86.5C 2851RPM | 249.3M/254.2Mh/s | A:120029 R:0.0% HW:2295 WU:1162.5/m

Each column is as follows:
Temperature Fanspeed
A 5 second exponentially decaying average hash rate / An all time average hash rate
The number of accepted shares
The number of rejected shares
The number of hardware erorrs
The Work Utility defined as the number of diff1 equivalent shares / minute

The cgminer status line shows:
TQ: 1  ST: 1  SS: 0  DW: 0  NB: 1  LW: 8  GF: 1  RF: 1

TQ is Total Queued work items.
ST is STaged work items (ready to use).
SS is Stale Shares discarded (detected and not submitted so don't count as rejects)
DW is Discarded Work items (work from block no longer valid to work on)
NB is New Blocks detected on the network
LW is Locally generated Work items
GF is Getwork Fail Occasions (server slow to provide work)
RF is Remote Fail occasions (server slow to accept work)
I'm not always right, but I'm never wrong..
Reply
#2
thanks for this usefull and detailed information!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  BFGMiner Interface Explained Xessive72 0 179 03-04-2018, 10:35 PM
Last Post: Xessive72

Forum Jump:


Users browsing this thread: 1 Guest(s)